3 Commonly Ignored Guidelines for Water Pump Repairs

When buying a pump for an underground water well, you should understand that proper maintenance is critical for the appropriate functioning of the equipment. If you don't, then you will often find yourself dealing with a malfunctioning device. Nonetheless, even if a breakdown happens, you will need the right equipment to carry out the repairs. Therefore, it is vital to follow critical pump repair guidelines. Unfortunately, some water pump maintenance procedures are commonly ignored by water well owners, and this article offers insight in this regard. Read on.  

Engage the Community First

Since all wells are fed by underground water sources, the chances are that you share the same underground source with other property owners in the community. Therefore, as you prepare to repair your faulty pump, you must inform and engage the community first. The reason is that the pumps contain oil and lubricants, and these can easily find their way into the underground water sources if not adequately managed during repairs. For this reason, you must inform your neighbours about your plans to repair your water pump. This way, when something happens to the underground water during repairs, then it is easy to identify where the problem originated. 

Check Water Levels in the Well

Sometimes, when a water pump is not pumping water at all or the pressure is low, it is easy to conclude that the pump is the problem. While this might be true, it is advised not to start dismantling the water pump before you check on the water levels in the well. See, when there is not enough water in your underground well, it is easy for the machine to misbehave. In fact, if you keep the pump running, then you will eventually damage it. Therefore, before pulling your pump apart for repairs, confirm the water levels in the well so that you can eliminate low water levels as the cause of the malfunction. 

Place Seals on Clean, Flat Surfaces

Seals are vital components of a water pump system. During repairs, therefore, you might be forced to remove and clean the parts. Since seals are delicate, it is critical to keep them in a secure surface. Unfortunately, most people ignore this step and end up placing clean seals on dusty surfaces where they can easily collect dirt. If you install the seals with the dirt, then they will soon be dealing with broken seals, and that is the last thing you need to happen to your water pump.